• Welcome to Fast engineers & Fabricators

Blogs

Our Blogs

Hassle free fuel management service

New fuels such as biodiesel and low sulfur heating oil will soon be prevalent throughout the Oilheat industry that might create new challenges for you and the distributors.

Read More

Best Metal Fabricator at fastengineers

Fast Engineers and Fabricators are well known for the services of Automation, and Installation of Hi-Speed Diesel ( HSD ) Storage.

Read More

Peso License Consultant

The headquarters of Petroleum and Explosives Safety Organisation (PESO) is established in Nagpur, INDIA.

Read More

Find your Solutions with fast engineers and fabricators

We will begin with something obvious today. If you are facing a problem and are not able to reach the solution then you must change the way of solving it.

Read More

BEST GASOLINE SERVICE STATION

Fuel Dispenser Supplier | Gasoline Station Services

Read More

Know About Types Of Fuels With Fast Engineers and Fabricators

One of the most commonly used types is Gasoline. This petroleum-based fuel is found in most of today’s common cars. There are various advantages of using Gasoline.

Read More

AREAS OF WORK OF PESO License Consultant

Scrutiny and appraisal of proposals for approval of design and construction of explosives vans, Bulk Mixing and Delivery vehicles (BMD) for site manufacture of explosives, vehicles for transport of bulk compressed gases/cryogenic liquids in pressure vessels, petroleum containers and tank trucks including its safety fittings.

Read More

DIFFERENT TYPES OF MANIFOLDS

Direct connect, also known as inline manifold, usually comes with 2-valve assembly and ½” process connection. The direct connect, sometimes even referred to as block and bleed manifolds, have either female or male process connections which connect to transmitters using male National Pipe Thread (NPT).

Read More

BEST SERVICES OF Fast Engineers and Fabrications

These Manifold systems can range from simple supply chambers with several outlets, to multi-chambered flow control units and are available in basically four types - direct connect, coplanar, traditional, and conventional.

Read More

WHAT ARE Manifold Fastengineers

Along with the above-mentioned components, various other materials also play an important part in their creation depending upon the type of material that makes up a manifold, fluid compatibility and performance will be affected.

Read More

Types of Fabrication Services at Fastengineers

The first and the most commonly used fabrication method is Cutting which includes cutting of a metal workpiece is a common fabrication technique in which the material is cut into smaller sections.Modern techniques involving state-of-the-art machinery are used now which has almost replaced the old days of sawing methods.

Read More

Oil and Petroleum Storage Tanks

These industrial storage tanks can be available in areas like petroleum producing and refining, petrochemical and chemical manufacturing,bulk storage and transfer operations, other industries consuming or producing liquids and vapors.

Read More

Various Processes Of Metal Fabrication

Metal folding or fabrication is simply the process of applying one or bends to a sheet of metal by securing the sheet at a certain point and applying enough pressure to fold the metal. The angle of the bend is usually determined by the shape of the top or bottom tool and also the pressure applied.

Read More

INSIGHT ABOUT METAL FABRICATION

The second process to be taken into consideration is machining which is the process of shaping metal by removing the unwanted material from it. This process can be performed in a variety of ways and there are many different machining processes, including drilling, turning, and milling.

Read More

Requirement Of Explosive License at Fast Engineers

People usually wonder if Explosive licence is a compulsion of diesel and various other products. This license is a mandate however, no licence is needed for possession and sale in following cases : Notwithstanding anything contained in rule 113, no licence shall be necessary for the possession.

Read More

CONSULTANT SERVICE PROVIDER in Fast Engineers Service

Fast Engineer & Fabricator provides the best services of Solvent License Consultant, Petroleum Storage, Peso License Consultant. We are known to help in acquiring Explosive License under Petroleum Rules, 2002, Gas Cylinder Rules 2004, SMPV Rules 1981 and Explosive Rule, 2008 from the Explosive Department having the H.O. at Nagpur and other offices in India.

Read More

THE BEST ENGINEERING SERVICES IS JUST ONE CLICK AWAY

If you will just sit on the problem, nothing will come out of it. When the problem is of typical nature-complex problem solving organisations usually take the charge to resolve them. These types of problems usually follow the effects you wish to create and the changes you make.

Read More

Avail Best Gas Dispensers

Gas dispensers provide various functions but One of the most important functions of dispensers is - to accurately measure the total amount of gas being pumped. Equipment should be chosen carefully when opening or remodeling a petroleum business because the proper equipment selection will be of great help for a successful operation.

Read More

DIFFERENT TYPES OF STORAGE TANKS FOR OIL AND PETROLEUM

Petroleum and oil storage tanks used in industries are made of different materials, different from plastics etc. They are made from materials like reinforced concrete, stainless steel, plastic and carbon steel and are used as reservoirs that store oil temporarily during the processing phase before the consumption.

Read More

COMPONENTS AND WORKING OF MANIFOLD SYSTEM

Manifold Mixing Unit – The Mixing Unit is another important component which is used to blend the water pumped from the heating source and the floor circuits, and helps to maintain the correct temperature for the entire system without affecting any of the primary floor circuits.

Read More

what exactly is metal fabrication

One of the various ways is to use hammer or die strikes to apply compressive force to shape metal - commonly known as the process of forging. This process can take place in both cold and hot temperatures and are respectively known as cold forging and warm forging.

Read More

PRODUCTS THAT REQUIRE PESO and Explosive License

As a PESO licence consultant, we help in getting approval / licenses as per different Acts/Rules for Explosive/ Petroleum/ Inflammable for various premises/units/ vehicles.

Read More

REQUIREMENTS OF STORING PETROLEUM

The law of Petroleum (Consolidation) Regulations 2014 (PCR) has been made applicable for the proper storage of Petroleum keeping in mind all the safety measures.

Read More

BEST INSTALLATION SERVICE OF UST

A UST referred to as an Underground Storage Tank System is a storage system in which a tank and any underground piping is connected to the tank that has minimum 10 percent of its combined volume underground.

Read More

HOW FAST ENGINEERS and FABRICATION CAN HELP YOU WITH PESO LICENCE

One more thing to focus on is that the products that fall under PESO are generally highly hazardous and dangerous which necessitate the companies to have their products certified after proper due diligence.

Read More

CONTRACT MANUFACTURING at fastengineers.in

In other words, in the process of contract manufacturing, contract manufacturers enter into an agreement with a company to produce some components, or whole product for the company as per their requirements and specifications

Read More

MARKET OVERVIEW OF METAL FABRICATION INDUSTRY

Looking from a service angle, it can be segmented into Metal Punching, Metal Stamping, Metal Forming, Metal Welding, Metal Cutting, Metal Polishing, and other services.

Read More

PETROLEUM STORAGE AND IT'S STORAGE LIFE

If products like gasoline come in direct contact with your skin, wash with soapy water immediately to avoid any skin irritation.

Read More

FIND YOUR STORAGE TANKS FOR OIL AND PETROLEUM

It usually involves two types of storage tanks in the market - underground storage tanks and above ground storage tanks.

Read More

INSIGHT ABOUT PETROLEUM

"Petroleum Class A" is the class of petroleum which has a flash-point below Twenty-three degrees centigrade. Following points should be kept in mind while making or selecting the containers for Petroleum class A

Read More

WHY CHOOSE FAST ENGINEERS & FABRICATORS

From a business point of view, if the customer is not satisfied with your service then he will share his bad experience with others. On the other hand, a satisfied client is more likely to recommend your business if they have positive customer experiences.

Read More

WELDING AND FABRICATION at fastengineers.in

The welding industry is not for everyone, because it is physically demanding and a very challenging job. However, it's a job that is essential to a wide variety of products and infrastructures, and one that plays an important role in various aspects of everyday life.

Read More